RS232 to TTL Serial Interface Module with the MAX3232 transceiver IC that facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion.
The MAX3232 IC with 16 pin requires 3.0 V to 5.5 V to operate and has two receivers and two transmitters...
The RS232/485 TO ETHERNET is an Easy-to-use, High-speed, Low-power, High-stability, Upgradable industrial RS232/RS485 to Ethernet converter, which allows bi-directional transparent data transmission between RS232/RS485 and RJ45 port Ethernet, even at the same time, it can be configured via webpage.
..
I2C Interface 1602 2004 LCD Adapter Plate for Arduino has PCF8574 I2C chip that converts I2C serial data to parallell data for the LCD display. It can be connected to a standard HD44780 compatible 16x2 or 20x4 Character Display Module that supports 4 bit mode. In general, LCD connection with A..
The CP2102 basic board made by rhydoLABZ for the USB to serial conversion. This is a great little tool for embedded systems that require a serial connection to a computer. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the ..
This is the CP21202 Breakout Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus via a mini USB connector and will appear as a standard COM port.
Thes CP2102 doesn’t require any external oscillator, it ha..
The microUSB Programming Adapter (uUSB-PA5) is a USB to Serial-TTL UART bridge converter which is simple, cost effective, very small and easy to use.It uses a mini-B type USB connector to connect to your PC and is based on the FTDI FT232RQ USB to Serial Bridge IC from FTDI Chip.
It provides t..
The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC (as used in the uUSB-MB5 module) which handles all the USB signaling and protocols. The cable provides a fast and simple way to connect all of the 4D devices that requ..
WIZ120SR is an embedded module based on WIZnet W5100 & ARM Cortex-M3. WIZ120SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment. It sup..
This is the newest revision of rhydoLABZ make USB to RS 485 Converter board (INT-1201) .It is very compact and ready to use circuitry which performs the USB (Universal Serial Bus) to two wire RS485 (2 Wire Half Duplex) and vice versa conversion. The board holds an FT232RL USB UART I..
This is newest revision of rhydoLABZ make USB to Serial Converter (FT232RL Breakout) board. It is a compact and ready to use board which performs USB to Serial TTL (5V and 3V3) and vice versa conversion. The board holds an FT232RL USB UART IC for conversion. This module process an ea..
Wiz145SR is a serial to ethernet converter module made by Wiznet , it is having multiple serial interface. It can connect up to 4 Serial ports. the module is built with W5300 chip.
Feature
Support 4 nos serial ports
Connect with the Serial Device directly
Adding ..
This board converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Ardui..
The Pololu USB-to-serial adapter is a tiny unit that makes it easy to connect a microcontroller project to a PC. You can connect the adapter directly to a microcontroller without an RS-232-to-TTL level converter. It is USB 2.0-compatible and will work with your existing programs that interface with ..